Download Windows 95 For Dosbox

Posted By admin On 13/01/22

Notes

  1. Download Windows 95 For Dosbox Free
  2. Windows Me On Dosbox
  3. Dosbox Windows 95 Online

You will need a copy of the Windows 95 boot disk.

Step 1: DOSBox Setup

DOSBox emulator port for Windows Phone. Not all DOS games are supported (due to the ARM CPU performance and hardware limitations) but a lot of good old games (including Sierra's quests, Warcraft.

  • Installing Windows 95 in DOSBox, tips to achieve a successful install and how to navigate any problems that can come up. Running Windows 95 in DOSBox. A comprehensive how to guide. Installation Video. The Windows 95 was designed to be simple and easy to follow and complete. For the sake of this guide I will point out a few.
  • DOSBox emulator port for Windows Phone. Not all DOS games are supported (due to the ARM CPU performance and hardware limitations) but a lot of good old games (including Sierra's quests, Warcraft, Heroes of Might & Magic and many more) are working fine. Its also possible to run Windows 3.1 and Windows 95 on phone!

Edit DOSBOX.CONF (the configuration file for DOSBox) and some of the lines with this code (if it exists):

Dosbox

output=surface -> output=opengl

vmemsize=x -> vmemsize=8

memsize=16 -> memsize=512

core=auto -> core=dynamic

cputype=auto -> cputype=pentium

cycles=auto -> cycles=max

voodoo=default -> voodoo=opengl

(this will be the end of DOSBOX.CONF)

[autoexec]

SET GLIDE=600

(add these after you have made WIN95VHD.img)

imgmount a '/path/to/Windows95b.img' -size 1,440

imgmount c '/path/to/WIN95VHD.img' -size 2097152

Step 2: Make the Virtual Hard Disk

Run this command for DOSBox Daum builds:

Download Windows 95 For Dosbox Free

Z:> imgmake WIN95VHD.img -t hd -size 2048 -nofs

Or download the bochs tools, extract the archive, and run bximage.exe. Run the BXIMAGE.BAT under windows or wine to make an image. Here is the command for creating the image

bximage

Disk Image Creation Tool for Bochs

$Id: bximage.c,v 1.32 2006/06/16 07:29:33 vruppert Exp $

Do you want to create a floppy disk image or a hard disk image?

Please type hd or fd. [hd]

What kind of image should I create?

Please type flat, sparse or growing. [flat]

Enter the hard disk size in megabytes, between 1 and 129023

[10] 2048

I will create a 'flat' hard disk image with

cyl=xxx

heads=xx

sectors per track=xxx

total sectors=xxxxxxx

total size=2048 megabytes

What should I name the image?

[c.img] WIN95VHD.img

Writing: [] Done.

I wrote xxxxxxxxxx bytes to WIN95VHD.img.

This command creates the Windows 95 Virtual Hard Disk Image which will be used as the target image for installation files. This file can be found in the same directory as 'DOSBOX.CONF`. If you cannot mount the image, use a folder instead.

Step 3: Boot the drive

After you have made the VHD and added the lines for AUTOEXEC.BAT, restart DOSBox. To boot the drive, use command boot to boot from a drive.

Z:> boot -l a

You will now need to partition the VHD. Refer to the Windows 95 Installation Guide Step 2 for how to use make partitions here. You will also need to format the partition, which is part of Step 2.

Step 4: Getting the setup files

You will now need to get the setup files. Mount the WIN95VHD.img file we created earlier and copy the directory .WIN95 from the Windows 95 Disc. If you cannot mount the IMG file, then mount the cdrom drive as D, mkdir C:WIN95, and copy D:WIN95*.* C:WIN95. Start the Windows 95 Setup by using the commands:

A:> c:

C:> cd win95

C:WIN95> setup.exe /is

Do note after Windows 95 is ready to restart during setup, close DOSBOX, remove the floppy mount command and change the boot -l a to boot -l c. Information about setup is found here.

Install Windows 3.1 in DOSBox to run old 16-bit Windows games on 64-bit versions of Windows, Mac OS X, Linux, and anywhere else DOSBox runs. This is particularly useful as only 32-bit versions of Windows can run those 16-bit applications.

Windows 3.1 was actually just an application that ran on DOS, and DOSBox is an emulator designed to run DOS and DOS applications. Windows 3.1 in DOSBox is an ideal combination for running old Windows 3.1-era applications.

Install Windows 3.1

RELATED:How to Make Old Programs Work on Windows 10

First, you’ll need to create a folder on your computer. This folder will contain the contents of the “C:” drive you’ll provide to DOSBox. Don’t use your actual C: drive on Windows for this. Make a folder like “C:dos”, for example.

Create a folder inside the “C:dos” folder — for example, “C:dosINSTALL” — and copy all the files from your Windows 3.1 floppy disks to that folder. Windows 3.1 is still under Microsoft copyright, and can’t legally be downloaded from the web, although many websites do offer it for download and Microsoft no longer offers it for sale.

You can use Windows 3.1 or Windows for Workgroups 3.11 — whichever you have available.

Next, install and launch DOSBox. At the DOS prompt, type the following command and press Enter to mount the folder you created as your C: drive in DOSBox:

mount c c:dos

(If you named the folder somewhere else or placed it at another location, type that location instead of c:dos.)

Switch to the C: drive by typing the following two characters and pressing Enter:

c:

Next, enter the folder containing your Windows 3.1 installation files:

cd install

(If you named the folder something else, type that instead of install.)

Finally, launch the Windows 3.1 setup wizard:

setup.exe

Go through the Windows 3.1 setup wizard to install Windows 3.1 in DOSBox. When it’s done, close the DOS system by clicking “Reboot” in the wizard.

When you restart DOSBox, you can launch Windows 3.1 by running the following commands in order:

mount c c:dos

c:

cd windows

win

Install Video Drivers

RELATED:PCs Before Windows: What Using MS-DOS Was Actually Like

DOSBox supports standard VGA graphics. However, it also supports some other types of graphics. By default, it’s set up to emulate S3 Graphics. For best graphics support, you’ll want to install the S3 graphics drivers and configure Windows 3.1 to use a higher resolution and more colors.

You can download the S3 video driver from the Classic Games website. Unzip the .zip file to a folder inside your DOSBox C: drive folder. For example, it would make sense to put these files in the “C:doss3” folder.

In Windows 3.1, double-click the Main program folder and double-click the “Windows Setup” icon. Click the “Options” menu in the Windows Setup window and select “Change System Settings.”

Click the “Display” box, scroll down to the bottom, and select “Other display (Requires disk from OEM).”

Type the path to the S3 drivers. For example, if you unzipped them to the C:doss3 folder, you’d type “C:S3” here.

Choose your preferred resolution and colors. We recommend choosing 800×600 with 256 colors. This is the highest resolution and number of colors many games will support.

Click OK several times. Windows will install the drivers and you’ll be prompted to restart it. After you do, you’ll see your new graphical settings in effect.

If Windows won’t work properly after you select a display mode, run the following command after using the “cd windows” command to enter the Windows directory:

setup.exe

You’ll then be able to select a different video mode.

Install Sound Drivers

There’s one more driver issue to take care of. Windows 3.1 doesn’t include sound drivers that will work completely with the SoundBlaster sound hardware DOSBox is emulating. You’ll want to install those, too.

As with the S3 video driver, you can download the Sound Blaster 16 Creative Audio Driver from the Classic Games website. Unzip the downloaded archive into a folder like c:dossb

Exit Windows 3.1 by clicking “File” and selecting “Exit Windows” if it’s open in DOSBox. Run the following commands to launch the Sound Blaster 16 driver installer, assuming you unzipped the folder to c:dossb

cd c:sb

Windows Me On Dosbox

install.exe

Press Enter to install the drivers, select Full Installation, and press Enter again. By default, you’ll see the line: “Microsoft Windows 3.1 path : None”.

Select “Microsoft Windows 3.1 path” with the arrow keys and press Enter.

Enter the default path, which is C:WINDOWS, and press Enter. Press Enter again to continue.

On the next screen, select the “Interrupt setting: 5” value and press Enter. It’s set to 5 by default, but DOSBox’s default is 7.

Select “7” for the Interrupt Setting and press Enter. You can then press Enter to continue. Allow the installation process to finish and “reboot” your DOS system by closing DOSBox and reopening it.

Launch Windows 3.1 again and you’ll have full sound support, including support for MIDI audio. You should hear a sound as soon as you launch Windows 3.1 again.

Install and Run Games and Other Applications

To actually use an application, download it (or copy it from old disks) and place it in a folder inside your c:dos folder. For example, you might want to place it in c:dosgamename.

You can then create a shortcut to the game’s .exe file by clicking File > New and browsing to its .exe file. Double-click that shortcut to launch the game.

The game should just work, launching within the DOSBox window as if it were running on Windows 3.1 — after all, it is.

You don’t have to go through this entire setup process again in the future, either. Just take that c:dos folder — or whatever else you named it — and back it up. Move it to another computer and you can use it after installing DOSBox. Because we haven’t configured DOSBox at all and have just used its default settings, you won’t even have to tweak your DOSBox settings before it will work.

READ NEXT

Dosbox Windows 95 Online

  • › How to Merge Multiple Google Drive and Google Photos Accounts
  • › How to Edit Any Web Page in Chrome (or Any Browser)
  • › Google Announces Maps Incognito Mode and More Privacy Controls
  • › Confirmed: Windows 10 Setup Now Prevents Local Account Creation
  • › How to Disable the Apple Watch’s Always-On Display